It depends on the part you wanted to extract. The Linux Hive OS client supports GPU extraction as a basic function and CPU extraction as an additional function is also possible (miners are included for this). For GPU extraction, we recommend 4G RAM for the system and 4G VRAM for graphics cards. CPU performance and GPU extraction model depend on the CPU usage activity of the miner. For example, when extracting on the ethash algorithm, the processor is practically not involved. With other algorithms, the processor can be significantly involved in the calculations or validation of the received data. Other hardware requirements depend strictly on what you want to exploit. Hive can boot with 1G RAM and iGPU on board. Historical versions can be found heredownload.hiveos.farm/history/ The update will take a few minutes, after successfully updating the drivers on the Hive OS for nvidia, you should see the following window: Advanced Unix users (Linux or Mac) can use dd to write a RAW image to disk. Something like dd if=hiveos-XXX.img of=/dev/sdX bs=10M status=progress. But be careful to find the output disk “from”, use fdisk -l to list your partitions. Total MD5 and driver versions to check download.hiveos.farm/VERSIONS.txt Etcher is a recommended tool for writing Hive images to drives. It supports Windows, Mac, Linux.
It can also write an unzipped ZIP archive. 1. When selecting the downloaded hiveos image, there is no need to extract the image from the archive itself, as the program will do it itself. Select Image button When assembling GPU mining rigs, the question always arises of the choice of operating system: Windows, Linux or a special operating system for mining. While Windows is still preferred by novice miners because of the easy entry threshold, experienced miners with a large number of GPUs have operating system selection priorities that evolve towards stability, manageability, monitoring, graphics card tuning features, and reducing PC resource usage. And all these requirements are met by specialized Linux-based operating systems, a striking representative of which is the popular among miners – HiveOS. The purpose of this hardware is to highlight the installation and configuration features of HiveOS for beginners, as HiveOS has a number of undeniable advantages over Windows that greatly simplify the process of mining cryptocurrencies on the GPU. To download the HiveOS image, use only the official website. Link to downloads from the official website. The image is uploaded to a ZIP archive.
Download Hive OS only from the official website. The name of the image will be something like this – hiveos-0.6-190-stable@210108.img.xz. The image weighs about 1.3 GB. Go to the Install Website menu to download the desired installation image. This concludes the main part, which concerns the configuration of HiveOS for the first time. You can skip this step, but instead, you need to RIG_ID and enter RIG_PASSWORD the first time you start HIVEOS to activate the system. We open a terminal where we register the command “mc” and press Enter. Dozens of Teamviewer windows, random reboots, blue screens, constantly downloaded automatic updates, lack of remote control are already a thing of the past. Windows has been around for a long time, but it`s still Windows, and it still costs a fortune to buy it. It`s not a big deal if you build a single platform, but what if you build 100 or even 1000 platforms? Windows can be really annoying when it comes to the duration of uptime figures. Even though Windows manages to reliably perform its constant restart for updates and patches, it is almost impossible to shut it down without hijacking the registry. Click on the desired overclocking setting and it will be applied to your card.
Step 4 – Set the overclocking settings. The settings window for AMD graphics cards is different from NVIDIA cards and has its own nuances: can use the latest drivers and experimental features. Take control as an insectoid hive spirit. Explore a beautiful, vast and ruined underground world, full of dangers and lost civilizations. Can you reach the surface? Hive OS has several logs that you can scan to check for issues and errors or to check if it works. You can see the miner`s log and the system log. Launch the HDD Raw Copy Tool and select the Hive OS image in the File field (select SOURCE). The cheapest graphics card you can play on is an AMD Radeon HD 2600 XT. In addition, an AMD Radeon HD 7790 is recommended to run The Hive at the highest settings.
The minimum memory requirements for The Hive is 2 GB of RAM installed on your computer. If possible, make sure you have 4GB of RAM to fully enjoy The Hive. To play The Hive, you need at least one processor equivalent to an AMD Athlon 64 X2 5600+. An Intel Core i5-4400E is recommended to run it. In terms of game file size, you need at least 3GB of free space. As a result, we increased the hashrate from 27Mh/s to 28MH/s while reducing power consumption from 130 to 110W. At the same time, no reboot and direct access to the PC was required. 3 Click the Flash button! And wait for the image to be written to an external medium. Access the overclocking settings for all cards and set the overclocking values for each card individually. The order goes from GPU 0 to GPU N. Additional settings for miners when you select a pool from the list of supported pools are not required.
Therefore, the miner`s settings menu may only be required in rare cases when the default settings are unstable. First of all, you need to create a new farm, for this there is a PLUS button in the top menu. So, if you already have media with 8GB or more, let`s go to the HiveOS website to sign up and download an image of the operating system. I am running a HiveOS platform. 4BG DDR4, no SSD, 6x1070ti boots from 8GB USB flash drive. What I`m wondering is, if I add an extra 6 1070ti to the platform, do I need to add more memory? I know that in Windows, people talk about allocating virtual memory, but since I don`t have a hard drive or SSD, I think there`s nothing to use on my Linux system, but at the same time, I know that Linux mostly uses less memory. Use Deploy PXE for network deployment to take full control of the process and significantly reduce deployment time. Click Apply Changes and save the flyer.
We call the flight list, understandably, Zomby List or something like that. After the farm is created, you are redirected to the Worker tab. In the upper right, there is a “+” symbol that you use to create a new collaborator. SSDs are much more reliable and should be used in production environments. If you want to extend the life of your USB flash drive, log out after installation. We recommend that you use all professional systems and services in English. But if the English is really bad, you can switch to the Russian interface. To do this, go to Accounts – Language (language is immediately the first line in your account settings). Do you need to deploy hundreds or thousands of platforms with Hive OS? Once the image is flashed, you will discover a newly created drive in your system where you can pre-create rig.conf with user ID and password or FARM_HASH. Please find rig-config-example.txt on the HIVE drive. The ready rig.conf file can be downloaded from the platform settings. The second useful function is remote control of the miner: reading logs, configuration and restart.
In the menu, the symbol – PICKAXE is responsible for controlling the miner. While the image is being written to disk, return to the HiveOS website and access your personal account. Go to Farms and select the desired worker, there we look for the Settings tab. We move on to notifications. In summary, apart from all these features, we have a rewards system that offers a 10% bonus as part of a referral reward system by sharing referral links online through various social media platforms, online forums, and blogs. After a minute we refresh the page in the browser and get a similar result: the next necessary function is to update HiveOS (up arrow icon). In addition to the operating system, miners are also automatically updated to the latest version. The default update is done in manual mode, but you can automate this process. We have already taken the first step to create a worker to maintain the RIG. CONF, then it remains to configure wallets, flight sheets and choose the optimal settings for graphics cards.
